Show
Asked by Connie_toyota May 13, 2013 at 09:46 AM about the 2012 Toyota Camry SE Question type: Maintenance & Repair 12 Answers
1. Ignition off with Trip A showing in the Instrument Cluster. 2 Press and hold the "trip meter reset button" with turning the ignition to ON. 3. Hold trip meter reset button till display says COMPLETE / 000000. 159 people found this helpful. If all else fails - consult the owner's manual under "Maintenance" 19 people found this helpful.
This WORKED!!! Thanks a million! 13 people found this helpful.
Awesome! Worked for me also! Thanks! 8 people found this helpful.
i will try it, my camry dosent need the tire rotation every 5000k miles, i blew a front tire, and the tire man said its a waste of money. do it at 30000k with the oil change., i hope this works with the push button start?
 3 people found this helpful. >>szliman...Your answer leads one to believe that you are changing the oil every 30,000 miles? Is that the case? Now I'm of the school that every 3000 miles for an oil change is very excessive and probably more of a marketing ploy by the oil companies, rather than a scientific reason. If you strictly drive in-town and never exceed 35 to 40 mpg for only short distances, yes your oil might need changing more often. But, if you drive in a normal manner of mixed freeway/in-town mileage, 7500 miles is a good distance. I had a Suburban that had a sensor that sampled the oil and once it reached a certain contamination level the display would say "Change Engine Oil". It seemed that the light would come on around 7000 miles. As for rotating your tires, 30,000 is WAY TOO long to wait to rotate. As for cost, Most chain tire stores will rotate your tires for nothing, even if you didn't buy your tires there. They do it as a service hoping you will come to them to buy your next set of tires. 10 people found this helpful.
I have a 2012 Toyota Camry and I had to turn it on then hold the Odometer button (on trip 1) down and then turn off the ignition and wait for the maint. reqd. light to stop blinking. 18 people found this helpful. this worked for me also. so happy to get bthat light to stay off 1 people found this helpful.
Wow, it worked! Thank you for saving my sanity! 1 people found this helpful.
THANKS!!!!!! 1 people found this helpful.
The manual was confusing but I eventually got there. It is a bit more complicated with keyless starting that my car has. Start car and use the reset button to move odometer reading to Trip A. Shut off engine. With foot off the brake, depress the Start button three times, while holding down the reset button. Continue holding for a few seconds and you'll see the Maint Required light turn off. I was having difficulty understanding how you get to "Ignition On" until I read that depressing the Start button changes the ignition status. First is "start" which won't happen because the brake is not depressed. The second press leads to "Accessories" and the third to "Ignition On" which is what you need to turn off the Maintenance Required light. I'm happy. 20 people found this helpful.
Bingo! Thank you. 2 people found this helpful. Your Answer:Related Questions
Looking for a Used Camry in your area?CarGurus has 34,548 nationwide Camry listings starting at $1,000. Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies. How do you reset the maintenance required light on a Toyota Camry?Reset Maintenance Light: Toyota Camry Instructions. Put your key in the ignition and flip to position one. ... . Push and hold the dashboard odometer button and turn the key to position two.. Keep holding the odometer button until the maintenance light starts to flash. ... . Let go of the odometer button and start your car.. What does it mean when maintenance required light is on 2012 Toyota Camry?The Toyota Camry's 'maint reqd' light simply means a service interval has been met. And this means engine oil is due for change. It comes on 5,000 miles after the last time it was reset.
How do you clear the maintenance message on a Toyota?Put your key in the ignition and turn it to position one, the position just before starting the car. Push and hold the trip meter reset button on the dashboard, then turn your key to position two. Continue holding the odometer button for 10 seconds. The light should then flash, possibly beep, and then go out.
|
Resetting the maintenance light on a 2012 toyota camry
Copyright © 2024 ketiadaan Inc.
