Kinetico k5 drinking water station replacement filters

Reverse Osmosis

Table of Contents Show

All About the Kinetico 9461A Carbon/Sediment Prefilter and 9306B Taste & Odor Postfilter
How often do you change Kinetico K5 filters?
How many filters does a Kinetico K5 have?
How do you change the filter on a Kinetico K5 water station?
How often should you change Kinetico filter?

Uses a semi-permeable membrane that only water can pass through.

MACguard®

Shuts off the supply to the tap automatically when the cartridge has expired, ensuring only filtered water is available.

Bio-pure

Medical grade filter removes 99.99% of viruses and bacteria.

EverClean Rinse®

Prolongs the life of the RO membrane by selfcleaning with the highquality water produced by the system.

Non-electric

By using the kinetic energy of moving water to power our systems, we eliminate the need for electricity anywhere near the unit!

PureMometer®

The PureMometer® will indicate when the filter cartridge needs to be changed.

> Taps

Sleek, stylish, traditional or contemporary, whatever your preference we have the perfect drinking water or three-way tap for your kitchen.

> Kinetico K5 Replacement Cartridges

Once saturated, all cartridges for the Kinetico K5 drinking water filter are easy to replace. You will find all the cartridges you need here...

> Kinetico Water Softener

Extend the warranty of a K5 Drinking Water Filter to 10 years with a Kinetico Water Softener.

All About the Kinetico 9461A Carbon/Sediment Prefilter and 9306B Taste & Odor Postfilter

Whether you have read studies claiming that your drinking water may contain heavy metals, pathogens, or various chemicals, or you simply want to change the flavor, the Kinetico water filters are designed to reduce aesthetic chlorine, sediment, odor, and unpleasant taste. These new Kinetico water filters are designed to work with a variety of water systems. Here is some beneficial information before you purchase your Kinetico water filters on eBay.

What is the difference between Kinetico 9461A and Kinetico 9306B?

Although both 9307A and 9306B Kinetico filters are similar, they do have slight differences. The 9306B is designed to reduce unpleasant taste, aesthetic chlorine, and odor in the Kinetico water systems. The 9307A Kinetico pre-filter cartridge is designed to just reduce chlorine and sediment.

The benefits of reverse osmosis

Reverse osmosis is a process where water is strained side to side by a semi-permeable membrane. This leaves the contaminants behind, and they are flushed down a drain, leaving the clean and filtered drinking water collecting in its intended holding tank. Here are the benefits of reverse osmosis that the Kinetico water filters use:

Filters containing a reverse osmosis system removes contaminants
Reverse osmosis is claimed to rid soft water of sodium
Reverse osmosis is claimed to enhance the taste of your regular drinking water

Essentials to look for in water filters

A water filter is an important part of your life, as such, here are a few things to consider purchasing your Kinetico water filters:

Contamination removal- This is usually the main reason why you would get a water filter in the first place. Water pollution causes many impurities such as bacteria to infect your water; you should choose a filter that has been certified to check for contaminants. The majority of filters remove approximately 40 contaminants; some can go higher while others can go significantly lower.
Rate of filtration-This might be something you could easily look over. A max filter rate is how much water a filter can filter in one day. Your filter should filter the same amount or higher than your consumption rate.
Water quality- A filter should improve water quality along with providing contaminants removal. It should maintain proper pH levels while preserving minerals that are good for you. It should also remove any unpleasant tastes and odors as well.
Cost- Your budget might influence your decision to purchase a filter; the final cost depends on a few things such as the number of stages required to process the water, rate of filtration, and storage capacity. You do not need everything, however, just contaminants you would like to remove and other features you would require.

Content provided for informational purposes only. eBay is not affiliated with or endorsed by Kinetico.

How often do you change Kinetico K5 filters?

Your K5 RO filters need replacement every 500 gallons. The Kinetico will alert you to this by a sudden decrease or cessation of drinking water from the faucet. You should always confirm the need for a new filter set by looking at the Puremometer in the top of the MacGuard filter housing.

How many filters does a Kinetico K5 have?

The Kinetico K5 Drinking Water Station uses three standard filters - one to remove chlorine, another to remove contaminants such as metals and nitrates, and one more to eliminate additional compounds that could result in foul tastes and odors.

How do you change the filter on a Kinetico K5 water station?

Change your Filters.

Step 1: Shut off the water to your K5. ... .

Step 2: Depressurize the system. ... .

Step 3: Remove the side panel of the K5. ... .

Step 4: Replace your filter cartridges. ... .

Step 5: Replace the side panel to secure your K5. ... .

Step 6: Turn the water to your K5 back on. ... .

Step 7: Flush the system..

How often should you change Kinetico filter?

The rule of thumb is to change your Kinetico water prefilter once every three-to-six months, depending on your water's properties. Keep in mind that a sudden decrease in water pressure can indicate that your filter may be clogged and in need of assistance.

kinetico k5 drinking water station replacement filters