How to reset oil life on 2022 jeep wrangler jl

Last Updated on December 4, 2020 by Christ

Oil Life Reset: Jeep Wrangler Oil Change Required Light (2008-2021) – The Jeep Wrangler is an off-road vehicle produced by the American car manufacturer Jeep since 1987 to replace the CJ. Over the years, four different series have been made, named YJ, TJ, JK, and JL.

In 2007 the third generation of the Wrangler was introduced, called the JK. It was available in 3.8 petrol and 2.8 diesel versions. The fourth-generation was introduced in 2018.

How to reset oil life on 2022 jeep wrangler jl

Contents

  • 1 Oil Life Reset: Jeep Wrangler Oil Change Required Light (2008-2021)
    • 1.1 3rd Generation JK (2008-2017)
    • 1.2 4th Generation JL (2018-2021)
      • 1.2.1 With Gas Pedal
      • 1.2.2 With Cluster Display

Oil Life Reset: Jeep Wrangler Oil Change Required Light (2008-2021)

When you exceed the next scheduled oil change interval, the Oil Change Required light will display in the screen. This indicator system must be reset after performed the maintenance on your vehicle. Depending on your vehicle model, here are a few ways to reset the oil light on 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 Jeep Wrangler:

3rd Generation JK (2008-2017)

Time needed: 7 minutes.

The easiest way to reset the oil light on the Jeep Wrangler is by pressing the gas pedal. Here’s how to get started:

  1. Place the ignition to the RUN position without starting the engine

    If your vehicle has the keyless starting system, press the ENGINE START/STOP button twice without pressing the brake pedal

  2. Fully depress the GAS pedal, three times within 10 seconds

    Don’t rush, make sure you press it fully

  3. Turn off the ignition

    Press the ENGINE START/STOP button once

  4. Verify the indicator has been reset by starting the engine

    Done!

4th Generation JL (2018-2021)

For the vehicles 2018 model year or above, you can reset the oil through gas pedal or through the instrument cluster by using the EVIC control buttons. Here’s how to do it:

With Gas Pedal

The fastest way to reset the oil light on the Jeep Wrangler is by depressing the GAS pedal three times within 10 seconds after turning on the ignition without starting the engine.

With Cluster Display

  • Press the ENGINE START/STOP button twice without pressing the brake pedal to make the vehicle in the RUN position without start the engine
  • Go to the VEHICLE INFO by using the ▼navigation button

How to reset oil life on 2022 jeep wrangler jl

  • Scroll to the OIL LIFE menu by using the ◄ ►navigation button
  • Press and hold the OK button to execute the oil life reset

These instructions are based on the Jeep Wrangler owner’s manual. This procedure should apply to the third and fourth generations of the Jeep Wrangler (2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 model years). Hopefully, the article Oil Life Reset: Jeep Wrangler Oil Change Required Light (2008-2021) can solve your problem. Good Luck!

Last Updated on July 13, 2022 by Nick

Hey guys, what’s up. I just finished changing the engine oil in my car. So now I’m going to show you how to reset the oil life or oil change required minder light on my Jeep Wrangler. When the light comes up and says, you know, oil change or whatever it is, I’ll show you how to get rid of that.

It’s a little bit of a procedure, and it’s a little different than many other vehicles. You press a button and scroll through a few screens, but I’ll show you how to get past and reset it. So let’s jump right into that.

Table of Contents

  • The Easy Way To Reset Oil Life in Jeep Wrangler (2018-2023)
  • Another Way to Reset Oil Change Light on Jeep Wrangler JL
  • What Effect Do Oil Additives Have on Your Car Engine?
  • Anti-Oxidant
  • Zinc
  • Detergents
  • Dispersants
  • FAQ – Oil Change Required

The Easy Way To Reset Oil Life in Jeep Wrangler (2018-2023)

This is the quickest and most common way to reset oil life on all Jeep cars. So let’s going to reset the oil change indicator with these simple steps:

  • Turn the ignition keys to the RUN position or press the START button twice without turning the engine
  • Once you’ve done that, the lights will flash, and you have 10 seconds when you need to step on the GAS pedal three times.
  • Once you do that, you can remove your keys from the ignition, which should be reset.

Another Way to Reset Oil Change Light on Jeep Wrangler JL

Time needed: 3 minutes.

In this section, I will show you how to reset the oil life on a Jeep Wrangler by using the steering button. This is a 2019 model here, but it will be the same in a few different years.

  1. We need to turn the ignition to the RUN position

    On a push button Start ignition, you need to press it two times to make the ignition enter the run position, and don’t actually start the engine though

  2. Go to the VEHICLE INFO

    Once you have your ignition in the run position, we will use the buttons on the left-hand side of the steering wheel, and we will scroll down until we see the Vehicle Info screen.

    How to reset oil life on 2022 jeep wrangler jl

  3. Find the OIL LIFE

    Next, you will want to press the left or right button depending on which screen you’re on, and we’ll scroll over until we get to the Oil Life screen.

  4. Press and hold the OK button

    Finally, we’re going to press and hold down the ok button. That’s what will reset it, so press and hold that down.

  5. Restart your car

    Turn the ignition off and start the engine to verify the indicator has been reset.

For your info, this operation work for the Jeep Wrangler JL (2018, 2019, 2020, 2021, 2022, and 2023 model years). For the older ones, you can reach it here.

What Effect Do Oil Additives Have on Your Car Engine?

Engine oils are complicated, and they include all kinds of different additives which are important for your engine’s health. So this is not a complete list of all the additives you can expect to find in oil, but we will touch on some of the major ones here. 

So we’re going to work through different additives, talk about what they are, what they are used for within the oil, and then what the consequence is of, you know, using that oil for far too long and not changing it on time.

Anti-Oxidant

The first one is anti-oxidants, and oxidation is the primary cause of oil degradation. The anti-oxidants are super important in reducing that rate of oxidation. So the consequence of waiting too long is that this oil starts to break down more and more, losing its effectiveness, and you have an increase in wear on your engine.

Zinc

We also have anti-wear additives; for example, zinc can be used to do this. These zinc additives help react with rough surfaces to create a sacrificial barrier and help smooth out that surface to reduce the friction and amount of wear you have. 

So over time, it loses its effectiveness as you use that zinc and remove those sacrificial barriers. Of course, you’ll have more wear if you have something preventing wear that goes away, or it’s not as effective anymore you have more wear.

Detergents

Detergents are very important for preventing corrosion within the engine and helping to prevent sludge from building up within the engine. So over time, as that sludge builds up and your detergents begin to lose effectiveness, well, that sludge can get within passageways and reduce oil flow. So if you reduce that oil flow through those passageways, you’re getting less oil through them, less protection, increasing friction, and increasing wear.

This can also lead to a decrease in the effectiveness of your detergents. You can have excessive carbon deposits starting to form within your engine. 

Dispersants

Also helping to prevent carbon deposits, we have dispersants. The dispersants are really cool. They’ll actually surround deposit precursors. They’ll attach themselves to it and suspend that deposit precursor within the oil, so it just circulates within the engine. Perhaps the filter will be able to filter it out; if not, it just continues to spread within that engine but doesn’t attach to anything and form a harmful carbon deposit.

So these dispersants help to suspend that deposit, and in doing so, you don’t have those deposits forming within your engine. Of course, the longer you wait, the more these you know deposit precursors will be held within your engine. So if you don’t change it out well, you’ve got all those deposits floating around in your oil just waiting to attach to something, and you’ve never actually removed all those deposits from your engine.

It’s actually a good thing, you know to see that dark oil coming out. It means you’re removing all those contaminants when you change the oil. However, you don’t want those contaminants in there forever, so you need to change your oil on time.

FAQ – Oil Change Required

What type and how much oil does my Jeep Wrangler take?

Full synthetic oil is advised to be used in a 2019 Jeep Wrangler. The 2.0L 4 -cylinder turbo operates best on SAE 5W-30 and carries 5 quarts of oil. The 3.6L V6 engine uses SAE 0W-20 and can take 5 quarts.

How much is a tune-up for a Jeep Wrangler?

The cost of a Jeep wrangler’s tune-up may range from $150 to $500, depending on the work required. Changing the spark plugs is likely to cost more than the lower end of that range.

Why does my Jeep Wrangler’s engine oil leak out the front?

On a Jeep Wrangler, the valve cover gaskets are a typical source of oil leakage from the engine’s front end. An oil-covered valve cover or a burning oil smell while the engine is running are obvious signs of a valve cover gasket failing to seal.

So there you have it, simple, straightforward, but some people are unaware of how to get it done. It would help if you did this when changing the oil in your Jeep. So you can ensure that you are getting the proper counter for the next oil change. So you’re maintaining the appropriate maintenance of your Jeep Wrangler JL. Until next time, See you.

About The Author

jacob

Hi! I'm Jacob. For ten years, I ran a repair business. I have been interested in automobiles since he was a child and spends all of my spare time assisting my father in his garage. I like providing others with useful info.

How do you reset the oil life on a Jeep Wrangler?

Oil Change Reset.
Without pushing the brake pedal, push the ENGINE START/STOP button and cycle the ignition to the ON/RUN position (do not start the engine)..
Fully depress the accelerator pedal, slowly, three times within 10 seconds..

How do I check the oil life on my Jeep JL?

Without starting the engine, turn the ignition in the ON/RUN mode position. In the instrument cluster display, navigate to “Vehicle Info” then “Oil Life.” Push and hold the 'OK' button until the oil life gauge resets to 100%.