How to clean top loader washing machine with cold water

Key steps to clean a washing machine inside and out:

  1. Clean the exterior with white vinegar and water, using a non-abrasive sponge.

  2. Use Domestos Thick Bleach to disinfect the inside by adding it to the drum with hot water, leaving for 1 hour, then selecting a hot wash.

  3. Remove and scrub the filter with warm soapy water. Make sure you put it back in properly before using the machine again.

From muddy kids’ clothes to large bed sheets, we load our washing machines up with all sorts of dirty laundry on a weekly basis but how often do we clean the machine itself? If you can't remember the last time yours got some TLC then here's how to clean a top loading washing machine, inside and out.

White vinegar is the ultimate solution so always have a bottle in your cleaning cupboard!

How to clean a top loader washing machine (exterior)

The exterior of your washing machine shouldn't need much care. Just follow these 4 steps to keep it looking it's best:

  1. Mix white vinegar with water in equal parts and apply to your washing machine.

  2. Scrub using a non-abrasive sponge.

  3. Wipe down with a microfiber cloth to dry and remove streaks.

  4. Use an old toothbrush to help you get into little spaces.

How to clean a top loader washing machine (interior)

The Poll

How do you choose your cleaning products?

0 Votes

It’s important you clean top loading washing machines on the inside too as this can help the machine last longer (and ensure a clean wash for your clothes). There are 3 main steps:

  1. Add plenty of hot water to the drum before adding up to 1 litre of Domestos Thick Bleach.

  2. Leave the mixture for an hour before running a hot wash cycle.

  3. If you’re wondering how to get the mildew smell out of a top load washer, run a second cycle adding half a cup of vinegar to the machine’s drum before wiping down the inside with a microfiber cloth - find out more of our tips to keep your machine smelling fresh.

For more general tips on how to clean any type of washing machine, please refer to our three-step guide to washing machine cleaning.

How to clean the filter in a top loader washing machine

Finally, don't forget to clean your washing machine's filter or all hard work could be wasted:

  1. Turn off the machine and disconnect the power. 

  2. Locate the filter by checking the user manual, before carefully taking it out.

  3. Mix warm water and a mild soap together in a bowl.

  4. Scrub the filter with the mixture using an old, but clean, toothbrush. Do not scrub too hard.

  5. Rinse with clean water and dry before replacing in the machine and plugging it back in.

Learning how to clean a smelly top load washing machine isn’t hard and can give you much fresher, cleaner clothes. Once your washing machine is sparkling, wget the most out of it with our clothes washing guide.

Whether it's laundry or dishes, turn down the dial for environmental savings and gleaming results.

It is a discussion we've been having on this website since its inception more than a decade ago: Does cold water clean as well as hot? Back in 2008, Collin Dunn wrote that pushing the 'hot' button on your washing machine was equivalent to driving 9 miles in a car. In 2011, John Laumer argued that refusal to use cold water is "bad for our budgets as well as the environment" and that, unless you're a car mechanic, you don't need hot water for everyday washing.

Today I am here with yet another defence of the cold-water team, inspired by an article in Apartment Therapy. Kay Gebhardt, a chemist and senior scientist for sustainability at Seventh Generation (a cleaning company), was interviewed for her opinion on the matter. She believes consumer practices are outdated:

"The perception that hot water cleans better than cold stems from the way we did laundry years and years ago. Back then, heat was useful because it sped up the cleaning process when detergents and machines were less efficient."

Nowadays, detergents have been formulated to be effective even in cold water. They no longer need to be "activated" with hot water, as earlier versions did, and contain enzymes that, in Gebhardt's words, "literally cut up the soils and allow the surfactants to move the stains off the clothing."

Cold water has additional benefits. It doesn't fix stains in place the way hot water does, meaning you can actually get cleaner-looking clothes as a result; and it is gentler on fabrics, increasing their longevity, especially if you hang-dry instead of putting them in the dryer. Combined with a bit of oxygen bleach and an extended pre-soak, cold water can work wonders on tough dirt.

The same applies to automatic dishwashers, where agitation and modern detergents are more than sufficient to clean dishes, no hot water or heated drying cycle needed. The hot water in a dishwasher usually tops out at 120 degrees F, which isn't enough to sanitize dishes; you need 150F for that. When it comes to clothes, the dryer can sanitize, but not the washer, and sunlight is just as effective – another reason to hang-dry outside. And you really only need to sanitize when "the soiled clothes are harboring nasty bacteria, such as fecal matter on cloth diapers, or vomit resulting from an illness."

The only time when hot water makes sense is when you're washing clothes or dishes by hand. For the former, it's mainly a matter of comfort, as the laundry detergent works the same regardless of the way you're washing clothes. (Some natural powdered detergents do require warm water to dissolve, but you can do that in a small dish before adding to the washer or sink.) For the latter, liquid dish detergents are formulated to need warm or hot water to kickstart their degreasing power. Finally, if you live in a cold climate and your water supply is frigidly cold in winter – say, almost at freezing level – then it makes sense to turn up the heat a bit.

Otherwise, turning down the heat on the washing machine and dishwasher can save you a boatload of energy. When it comes to laundry, three-quarters of emissions associated with a single load comes from heating the water itself, so a small tweak practiced over time can go a long way toward reducing your household's impact.

How do I clean my washing machine with cold water only?

If you only wash in cold water, run a cleaning cycle or run the machine empty on its hottest cycle with a bit of detergent. This will help clear out scrud. Wipe away mould deposits on door seals and other surfaces using hot soapy water and a soft cloth.

How do you clean a top loader washing machine without hot water?

If your machine does not have a hot water setting, then select a “white” or a “stain” cycle setting. Select the “extra rinse” option if your washer has that choice. Add ¾ cup of white vinegar OR ¾ cup non-chlorinated bleach (not both!) to the bleach dispenser or fill to its max level.

Does cold water get laundry clean?

Cold water is fine for most clothes and other items that you can safely put in the washing machine. It can remove many stains from clothing, including grass on your kid's jeans or makeup smudges on a sweater. Delicate fabrics (lace and silk) and dark, colorful fabrics actually do best in cold water.

How do I deep clean my top load washing machine?

Take some Chlorine-bleach, pour 1 quart into the water filled washer, and then let it agitate for 1 minute. Afterwards, just let it sit for one hour so it can soak. Finally, run the longest cycle you can from your washing machine settings without adding any detergent. One more time!